DT 12 – module for collecting cartons from the folder-gluer
DT 3 – module for packing cartons in collective packages
DT 4 – transport and alignment module for collective packages
DT 5 – Case taping module
DT 12
- Can be operated straight ahead or with 90 degree rotation.
- The start button is mounted on magnets allowing installation in any location
- Laser sensor that reads the number of cartons.
- Pneumatic Parcel Countdown Marker Package
- Electrical motor height adjustment system with position sensors for comfortable operation, no matter how tall the operator is
- Height adjustment in the range of 800-950mm
DT 3
- Side clamp gripper automatically (sensor and pneumatic actuator), helps to keep the collective packages in position
- Ability to work horizontally, or a slope that facilitates placement of collective packages
- Electrical motor height adjustment system with position sensors for comfortable operation regardless of the size of the collective packages
- Height adjustment in the range of 500-900mm
DT 4
Available in two formats:
- DT-600 to work with one DT 3
- DT-1200 to work with two DT 3
- Both modules allow the collective packages to be rotated by 90 degrees at the entrance to the module
- The DT 4 quarantees a simple and trouble-free insertion of the collective packages into taping module
DT 5
- Automatic folding of front, side and back flaps
- Taping from the top and bottom
- Full the integration with the DT line, the belts spin only when needed
- Side quards lockable with PILZ interlock
- The only taping machine on the market with inch, press-to-run function- much faster changeover format and sizing
DT 3 4- 600 (1200) SPECYFICATION
Minimum height of the working table | 800mm |
Maximum height of the working table | 950mm |
Minimum Elevator Height | 500mm |
Maximum Elevator Height | 900mm |
Minimum width of the collective packages* | 140mm |
Maximum width of the collective packages* | 600mm |
Minimum multipack length* | 200mm |
Maximum length of collective packages* | 800mm |